 |
US $39.99
Prototype Injection Molding, Thermoplastic Injection Molding, Injection Molds
Hobart, Washington USA (Articles Base) July 15, 2008
The Prototype Injection Molding and Injection Molds Services is a new webpage that was just added to the new Rapid Prototyping Information Website that has just been released. This new Prototype Injection Molding Process webpage has all of the information you need to know on Injection Prototyping and Thermoplastic Injection Molding and the main information you need to know on Prototype Injection Molding. You can visit this Thermoplastic Injection Molding Services webpage at: http://www.prototypezone.com/plastic-injection-molding/
Here is an excerpt from the new Thermoplastic Injection Molding and Molds webpage:
“Rapid Prototyping is the process of automated manufacturing of physical components using solid freeform fabrication. They are used in a wide range of applications, everything from medical to fine art. Rapid Prototyping machine works by taking virtual models from software and then converting it into extremely thin, horizontal cross-sections and then goes onto create each of the cross-section in physical space in a cyclic manner until the model is completed. Rapid Prototyping is a WYSIWYG process in which the virtual model bears identical resemblance to the finished physical model. Additional fabrications allows the machine to lay down layers of sheet, liquid or powder material and build up a series of cross-sections These layers are finally automatically fused together to render the final product.
The main advantage of rapid prototyping is the ability to create any shape no matter how complex the geometry is. The commonly used data interface between the machine and the software is the STL format. It works by approximating the geometry of a part using triangular facets, smaller the facets higher will be the surface quality. The word “rapid” is used relative top conventional methods which take days to construct a model depending upon its complexity. Rapid prototyping can create the model within a few hours, though it is highly dependent of the type of machines and the size of the model. There have been several new technologies available for rapid prototyping including Fused Deposition Modeling, Selective laser sintering, 3D printing, and Electron Beam Melting.”
The new Thermoplastic Injection Molding page is free information to members and non-members and can be found at: http://www.prototypezone.com/injection-molding/. However, users of Prototype Zone who decide to be members can join for free and receive two free E-Books on Rapid Prototyping for a limited time offer. Prototype Zone will be adding new information all the time on Rapid Prototyping so check back often in the forum and blog for the latest information at: http://www.prototypezone.com/plastic-molds/
About Prototype Zone: Prototype Zone is the leading information source and community website for all things about Prototyping and Rapid Prototyping. Visit the website to join for free and receive two free ebooks on Rapid Prototyping for a limited time offer.
About the Author
Author: Ryan Rounder, Director of PR
Email: Pressreleases@prototypezone.com
Website URL: http://www.prototypezone.com
Phone: 425-503-8401
City/State: Seattle, Washington
Chocolate and Easter go together as much as Easter eggs and baskets. Why not combine the different elements and learn how to make your own chocolate Easter candy? Your children can help make and decorate the chocolates. Making your own chocolate Easter candy is a great Easter activity to hep you enjoy more time with your kids.
Chocolate Easter candy can be made with any type of chocolate. Using dark or milk chocolate may be the easiest. However, if you would like to try your hand at making pastel eggs, choose white chocolate and add food coloring to create the shades you like. You can also purchase pre-colored white chocolate to make things easier. The colored chocolates are great for decorating, even if you prefer to make your candy out of dark or milk chocolate. You can also add extra ingredients such as nuts, fruit pieces, or peanut butter to make your chocolate candy even more custom made.
Getting Started
There are a few basic ingredients that you will need in order to make your chocolate Easter candy. Using higher quality chocolate will result in better tasting chocolate eggs; however, you can use any type you have. I find that it is easiest to purchase candy disks that were made specifically for melting and molds. Here is a short list of the basics you will need:
* Whatever chocolate you want to use
* Double boiler or microwave oven in which to melt the chocolate
* Heatproof bowl
* Candy molds in the shape of eggs, or a deviled egg tray
* Rubber spatula to stir the chocolate
* Pastry bag or plastic bag with a hole in the corner for piping chocolate
* Any decorations or extras you want to include
Now all you have to do is melt the chocolate, pour it into the molds, and release! There really is no end to how creative you can get depending on the molds and colors you choose. You can go as simple as solid colored eggs to three dimensional bunnies and more! Have fun with your choices!
Choosing the Right Chocolate Mold
When you first decide to start making chocolate Easter candy from chocolate molds, of course the first thing you must do is purchase a mold. While it is possible to use other types of food molds you may have around the house, for the best results, select a mold that was made specifically for chocolate.
Another mistake that people often make when they select their candy molds, is they go for the cutest molds with the most intricate details. In many cases this may be their first and last attempt at making their own chocolate Easter candy. As simple as making chocolate Easter candy from molds is, there is still an art and level of skill required. So for your first chocolate making endeavour, try to select molds that are of moderate size (no smaller than a quarter, no larger than a couple of inches) and that have few details, or at least those with large details as opposed to smaller finer details. The one from Fuzzy Bunny shown in the picture is a great starter mold for both variety, size and cuteness!
Use the manufacturers recommendations when using the chocolate molds, however, I often will rub a little vegetable oil on the molds before I use them (using very little oil - it should not pool in the bottom of the mold, only give the mold a shiny appearance.) You can get some great candy mold making tips here. Also, since you will be refrigerating your molds as they harden, I clean out my refrigerator of aromatic leftovers - that garlic smells good in the stew, but it won't be so great smelling on your chocolate. Also, make sure you have plenty of space to place the molds while they harden. Some people recommend hardening chocolate in the freezer to reduce the occurrence of smells as well as to speed the process, but I think the best results occur when using the refrigerator.
Article by Stefani Padilla, author, entrepreneur, home based business owner, wife and mom. For more great family holiday ideas and crafts visit Momprovement.com
Related posts
This entry was posted on Wednesday, September 21st, 2005 at 9:41 am and is filed under Cookies. You can follow any responses to this entry through the RSS 2.0 feed. You can leave a response, or trackback from your own site.
